I'm having a bit of trouble layering the image from one camera over another. Everything works fine in the editor:
![alt text][1]
When i run it on the iPad Air i keep getting graphical glitches like in the bottom left of this picture:
![alt text][2]
my cameras are set up like this:
Main camera,
depth: -1,
clear flags: sky box,
culling mask: everything
Second camera,
depth: 0,
clear flags: depth only,
culling mask: test
the capsule is on the "test" layer
the second camera and the capsule are far above the main camera and the other objects
both cameras have clipping planes of 0.3(near), 1000(far)
Any advice would be much appreciated
[1]: /storage/temp/55126-untitled5.png
[2]: /storage/temp/55127-img-0071.jpg
↧